Printed Angled Souls Slider For Razors SL Skates

Description

3D Printed Angled Souls for the Razors SL Skates (SLIDER ONLY)

*Hardware not included – compatible with stock hardware
*Upgraded hardware available

 

Angled Souls Features:     

Allows the same body positioning between coping boxes, ledges and rails for better balance and skill crossover.

The 3 angles of the Souls are for balance and protection on grinds:

Soul, Ledge Angle and Protection Angle.

 

Ledge Angle:

• Allows getting on top of the ledge for longer grinds, minimizing the slip-out problem.
• Allows a deeper lock-in on fatter round rails.
• Allows clearance for turning.

Soul Angle:

• The smaller Soul combined with the Ledge Angle allows closer contact to round rails.
• Matching front and back Soul width for a better lock-in for Topsides.

Protection Angle:

• Helps protect the width of the Ledge Angle from wearing down.
• This angle helps with Cess Slides.
• Top-down wear patterns for stability and longer life.

Funnel Backslide:

• Angle to the frame is offset to the top of the backslide, giving a backstop feeling. This creates a wider platform for balance.
• Top-down wear patterns to help keep a wide balance platform.
• Helps guide into correct positioning and budget switch-ups without jumping, by having a larger circumference on the top edge compared to the bottom edge.

Quality:

• Printed in PLA Plus, the industry standard material for 3D Printed skate parts.